Mori Seiki MV-65/40 CNC Vertical Machining Center

The Mori Seiki MV-65/40 is a BT-40 vertical machining centre that stretches 60-inch X, 25.59-inch Y and 25.59-inch Z travels across a table rated 4 409 pounds, packing big-part capability into a 138- by 114-inch footprint. A two-range gearbox feeds 20 horsepower to the spindle for 6 000 RPM in aluminium or 148 foot-pounds at 600 RPM when hogging 4140, while an inline oil chiller keeps thermal drift below half a thou during eight-hour runs. The MF-M6 Mori-Fanuc control blends conversational menus with full G-code; rapids tick 787 IPM on all axes, and a thirty-station side-mount arm swaps tools in three seconds chip-to-chip, so spindle-on-time stays high even in short-lot work. A Royal mist collector clears vapour, and dual screw conveyors eject swarf for unattended night shifts.

Compare it with the MV-45/40: that model tops out at a 43-inch table, 30-inch X travel, 20-tool magazine and a lighter 10 HP belt spindle; by contrast the MV-65/40 doubles the envelope, triples tool slots and adds an oil-cooled gearbox—yet both share identical Fanuc logic and BT-40 tooling, so programs port across in minutes.