About This Machine
High Precision CNC Horizontal Boring & Milling, Large Travels with 60ATC, Priced to sell and available to hit your floor immediately!
**All descriptions and specifications are preliminary and must be confirmed by buyer prior to purchase.**
Specifications
Table / Pallet Indexing:
0.001
Horizontal Table/Pallet Size in mm:
1,800mm
Number of Pallets:
2
X-Travel:
118.10"
Y-Travel:
78.70"
Z-Travel:
63.00"
Rapid Traverse:
354 IPM
Cutting Feed Rate:
.236 IPM
Spindle
Spindle Taper Type:
Other
Spindle Taper - Other:
ISO#50
Spindle Speed:
2,900 RPM
Spindle Motor:
50 HP
Tool Changer
Tool Magazine Capacity:
60
Tool Changer Type:
Arm
Control
Control Make/Model:
Fanuc 31i CNC Control
Control Options:
Color Monitor;G-Code;Helical Interpolation;Rigid Tapping;USB;Inch/Metric Conversion;Manual Pulse Generator / Pendant;Macros
Additional Control Options:
Directional spindle orientation
Spindle override 50% to 150%
HEIDENHAIN glass scales X, Y and Z
Renishaw Interface for RMP-60 (Interface only-Probe Not Included)
Graphic Display
PCMCIA Card Slot
Up to 1000 Registered Programs
AI Contour Control II (200 Block Preview)
64 Bit Microprocessor
3 Simultaneously Controllable Axes
Tool Length Compensation
Copy and Merge Edit Functions
Multi Part Program Editing
Input/output Interface (RS232C)
Absolute/incremental programming (G90, 91)
Programmable Data Input G10
Dwell (revolutions or seconds)
Canned cycles for drilling, boring, and tapping (G73, 74, 76, 80-89,)
Tool nose radius comp. (G40-42)
Background Editing
Exact Stop Mode (G61-G09)
Reference point returns (G27-G30)
Decimal Point Programming
Tool Life Management
Automatic Tool Offset Calculation
Options
Machine Options:
Worklight;Splash Guards
Additional Machine Specs:
X, Y & Z Positioning Accuracy: +/- 0.018mm (+/- 0.0007")
X, Y & Z Positioning Repeatability: +/- 0.013mm (+/- 0.0005")
B-axis Positioning Accuracy: +/- 12”
B (4x90) Degrees Positioning Accuracy: +/- 6”
Coolant pump motor: 2 hp
Coolant pump flow rate: 13.3 ppm
Coolant tank capacity: 180 gallons
Hydraulic Tank Capacity: 53 gal.
Hydraulic Oil Requirement (or Equivalent): Mobil DTE #24 or Shell Tellus 32
Hydraulic Tank Flow Rate: 12 rpm
Hydraulic Tank Pump Motor: 14.7 hp
Way Lubrication Tank Capacity: 1.07 gal
Way Lubrication Oil Requirement (or Equivalent): Mobil Vactra #2 or Shell Tonna G68
Spindle Oil Chiller Tank Capacity: 3.4 gal
Spindle Oil Chiller Oil Requirement (or Equivalent): Mobil Velocite #6 or Shell Tellus C10
High precision spindle with two double-row cylindrical roller bearings
and angular contact bearings preloaded by precise lock nut
Tool clamp/unclamp device
Massive Meehanite cast iron bed
Wide induction hardened and precision ground guide ways
Low friction fluoroplastic resin mating way surfaces
Ball screw is supported by bearings and connected by rigid coupling to servo motor
B-Axis simultaneous 360,0000 position rotary table
Double Pre-tensioned Ball screws
Centralized metered lubrication system
Telescopic way covers
Coolant Types:
Flood Coolant;Thru-Spindle Coolant
Coolant PSI:
435 PSI
Chip Removal:
Chip Conveyor